Assessment Validation Explained: Methods to Validate Assessments

Assessment Validation Explained: Methods to Validate Assessments

Blog Article

RTOs must handle various tasks post-registration, such as annual declarations, AVETMISS reporting, and marketing compliance, but validation usually presents the biggest challenge.

While we've discussed validation in multiple articles, let's return to the basics. ASQA defines validation as a quality check of the assessment process.

Validation involves verifying which areas of an RTO's assessment process are correct and highlighting where improvements are needed. Understanding its key components makes the task less intimidating.

The 2015 SRTOs Clause 1.8 requires RTOs to make sure their assessment systems, including RPL, are compliant with training package requirements and conducted per the Principles of Assessment and Rules of Evidence.

According to the standards, two types of validation are necessary.

The initial type of assessment validation ensures compliance with the training package assessment requirements within your RTO's scope.

The following validation type ensures that assessments follow the principles of assessment and rules of evidence.

It suggests that validation takes place before and after the assessment. This article focuses on the first type—assessment tool validation.

Exploring the Two Types of Assessment Validation

Assessment Validation: What It Is

As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.

Pre-assessment validation, also referred to as assessment tool validation, is related to the first part of the clause, ensuring all unit requirements are addressed and workbooks are entirely compliant.

In post-assessment validation, the emphasis is on implementation, ensuring that Registered Training Organisations conduct assessments as per the Principles of Assessment and Rules of Evidence.

Here, we will concentrate on assessment tool validation.

Steps for Conducting Assessment Tool Validation

Having reviewed the two types of validation, let’s dive into the specifics of assessment tool validation.

When Should You Conduct Assessment Tool Validation?

The purpose of assessment tool validation is to confirm that all elements, performance criteria, and performance and knowledge evidence are met by your assessment tools.

This implies that any time new learning resources are obtained, assessment tool validation must be done before student use.

There's no requirement to wait for your next 5-year cycle validation schedule. Validate new resources promptly to ensure they’re ready for students.

Nonetheless, there are other reasons to conduct this type of validation. Perform assessment tool validation when you:

- you update your resources
- new training products get added on scope
- training product updates are reviewed against your course
- your risk assessment includes identifying your learning resources as a risk

The Australian Skills Quality Authority's risk-based approach to regulation means RTOs must conduct regular risk assessments. Complaints from students about learning resources signal the need for assessment tool validation.

Selecting Training Products for Validation

Keep in mind, this validation ensures compliance of all learning resources before use. All RTOs must validate resources for each unit.

Assessment Tool Validation: Required Resources

Course Materials

Given that you are validating your assessment tools, you will need the complete array of your learning resources:

Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.

Learner/student workbook – check its suitability for use as an assessment tool. Verify clear instructions and sufficient answer fields. This is often a gap.

Assessor guide/marking guide – verify that instructions for assessors are comprehensive and clear benchmarks for each assessment item are included. Clear benchmarks are key to reliable assessment outcomes.

Other related resources – may consist of checklists, registers, and templates created separately from the workbook and marking guide. Validate them to ensure they are appropriate for the assessment task and address unit requirements.

Validation Committee

Clause 1.11 sets out the requirements for validation panel members, stating that validation can be conducted by one or more individuals. RTOs generally require all trainers and assessors to be involved, sometimes including industry experts.

Together, your validation panel should possess:

Relevant vocational competencies and up-to-date industry skills for the unit being validated

Current knowledge and skills related to vocational teaching and learning

Either one of the following training and assessment credentials:

TAE40116 Certificate IV in Training and Assessment or an updated successor

Validation form/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
A validation tool assists in both the validation process and documentation. It simplifies identifying how each assessment item corresponds to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
Additionally, it can provide proof that you have validated your resources before students use them.

ASQA does not specify a required template for assessment tool validation, but many templates are accessible online. These tools usually have validators review the tools as a whole to ensure they meet the principles of assessment.

Assessment Principles Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable

While such templates facilitate validation, they often result in judgment errors because there’s insufficient space for comments on each assessment item.

It is highly recommended to use a more detailed template for inspecting each unit requirement and the assessment items that map to them. Below is an example:

Element Performance Criteria Assessment Directions Benchmarks Assessment Instrument Rectification Recommendations
What do you Need to Check?
What Needs Checking?

As mentioned in our blog post Common Problems In Assessment Tools, you need to ensure that your assessment tools allow trainers to follow assessment principles and evidence rules.

Basic Principles of Assessment
Fairness – Does the assessment provide equal opportunity and access to all participants?

Flexibility – Does the assessment provide multiple options to show competence according to various needs and preferences?

Validity – Does the assessment evaluate what it is meant to evaluate? Is it a valid tool for measuring the required skill or knowledge?

Reliability – Will the assessment give the same results every time, regardless of the trainer? Will different assessors make the same decision on skill competence?

Key Rules of Evidence

Validity – Does the evidence confirm that the candidate has the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is the evidence enough to ensure the learner has the required skills and knowledge?

Authenticity – Does the assessment tool ensure that the work belongs to the candidate?

Currency – Are the assessment tools updated to reflect current units of competency and industry practices?

Although these are frequently covered in VET professional development and nationally recognised training, many tools still struggle to meet these requirements.

To avoid employing learning resources that leave unit requirements unmet, be sure to adhere to these guidelines:

Live Up to Your Words

Focus on the verbs used in the unit requirements and make sure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement asks students to:

Carry out each of the following tasks at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication per service and regulatory requirements:

nappying

prepare bottles, bottle-feed babies and sanitize equipment

prepare solids and feed babies

respond to infant signs and cues appropriately

settle babies for sleep and prepare them

monitor and encourage suitable physical exploration and gross motor skills for the age

Having students describe changing nappies for babies under 12 months doesn’t directly fulfill the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be doing the tasks.

Plurals Matter!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once check here on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t sufficient.

All or No Competence

Mind the lists. In the previous example, if students perform only half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Clarify Further

Each assessment item should have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s important that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What can be included in a work package?

Possible answers include:

Necessary materials

Applicable expenses

Length of activities

Allocated roles and responsibilities

If an assessment item demands multiple answers, specify how many answers a student must provide. This ensures your assessment is reliable, and the evidence gathered is valid.

The same applies to assessment items with double-barrelled questions or those that ask for multiple answers simultaneously. Such questions can confuse both students and assessors, as illustrated in the example below:

Identify a hazard and/or environmental concern in the work area and select the most effective hazard control hierarchy.

Possible answers could include, but are not limited to:

Weather conditions – work area isolation, engineering, PPE

Work area and ground conditions – elimination, isolation, engineering controls

People – isolating, engineering, administration

Structural hazards – substituting, isolation, engineering controls

Chemical hazards – isolating, engineering controls, administration

Equipment or machinery – isolation, engineering, administration

Avoiding double-barrelled questions makes it easier for students to respond and for assessors to accurately judge student competence.

Given these requirements, you might wonder, “Don’t learning resource developers provide audit guarantees?” However, these guarantees require waiting for an audit to rectify noncompliance. This impacts your compliance history, so it’s better to take a safe and compliant route.